– 13 –
In the information mode, you can specify, check, and edit various data and also perform other operations. The
information mode consists of the operator level and maintenance personnel level. Refer to the instruction manual of
IP-100E/SC-510 for the operator level.
[Maintenance personnel level]
1) Turn ON the power.
2) Press the switch for 3 seconds to call the information screen.
■ Information screen (Maintenance personnel level)
1) Press the respective switches to display the screens of the respective functions. (Press the switch , , , or
for 3 seconds for corresponding operation.)
Press switch to end the information mode, and the screen returns to that before the information mode.
Version display ..............................1. Refer to the version function.
Sewing common setting ................2. Refer to the sewing common data function.
Function setting .............................Refer to the instruction manual for IP-100E/SC-510.
Sewing management setting .........3. Refer to the sewing management information.
Data communication......................4. Refer to the communication function.
SM format (Smart media) ..............5. Refer to the SM format function.
(Caution) When the smart media format is executed, all data which have been currently recorded will
disappear. Be careful not to use the format for any other than the initialization of the smart
media.
(6) IP-100E information mode
To Next Page
Loading...
