JUKI SC-510 Series - Simplified Program Information Input Setting Code List and Connector Location List

– 99 –
(5) Simplified program information input setting code list and connector location list
List below is the list of port input code indicated in 7-segment LED at the time of input, connector No. and pin No.
on p.c.b., pin assignment, function, etc.
Input list
Port input Signal name Function Connector No. Pin No. Remarks
code and pin No.
on p.c.b.
0 Invalid Input is made invalid.
1 opi0 Optional input-1 CN51-1 2
2 opi1 Optional input-2 CN51-1 3
3 opi2 Optional input-3 CN51-2 2
4 opi3 Optional input-4 CN51-2 3
5 opi4 Optional input-5 CN51-3 2
6 opi5 Optional input-6 CN51-3 3
7 opi6 Optional input-7 CN51-4 2
8 opi7 Optional input-8 CN51-4 3
9 opo0 Input of optional output-1 ——Output signal of optional output-1 can be internally inputted.
10 opo1 Input of optional output-2 — — Output signal of optional output-2 can be internally inputted.
11 opo2 Input of optional output-3 — — Output signal of optional output-3 can be internally inputted.
12 opo3 Input of optional output-4 — — Output signal of optional output-4 can be internally inputted.
13 opo4 Input of optional output-5 — — Output signal of optional output-5 can be internally inputted.
14 opo5 Input of optional output-6 — — Output signal of optional output-6 can be internally inputted.
15 opo6 Input of optional output-7 — — Output signal of optional output-7 can be internally inputted.
16 opo7 Input of optional output-8 — — Output signal of optional output-8 can be internally inputted.
17 TRMD Thread trimmer output CN36 1
18 WPD Wiper output CN36 2
19 TLSUBD Tension release output CN36 7
20 BRD Reverse feed stitching output CN36 6
21 FLD Presser lifting output CN37 1
22 BZ Buzzer output — —
23 M_ERR Machine error output CN40 6
24 S.STATE Stop state output — —
25 HSTSW Needle up/down compe- CN38 13 CP-160 (operation panel)
nsating switch input
26 LSSW Low speed switch input CN39 11 Standing work type
27 BTSW Reverse feed stitching CN36 5
switch input
28 UDET UP position input CN33 6
29 DDET DOWN position input CN33 1
30 UP UP key input Operation panel — Front cover
31 DOWN DOWN key input Operation panel — Front cover
32 SET+ SET +key input Operation panel — Front cover
33 SET– SET -key input Operation panel — Front cover
34 TSW Thread trimmer switch input CN39 7 Standing work type
35 FLSW Presser lifter switch input CN36 4
36 FLSW Presser lifter switch input CN39 5 Standing work type
37 HSSW High speed switch input CN39 9 Standing work type
38 opi8 Optional input-9 CN123-1 2 Extension p.c.b. (IPOP p.c.b.) CN123
39 opi9 Optional input-10 CN123-1 3 Extension p.c.b. (IPOP p.c.b.) CN123
40 opi10 Optional input-11 CN123-2 2 Extension p.c.b. (IPOP p.c.b.) CN123
41 opi11 Optional input-12 CN123-2 3 Extension p.c.b. (IPOP p.c.b.) CN123
42 opi12 Optional input-13 CN123-3 2 Extension p.c.b. (IPOP p.c.b.) CN123
43 opi13 Optional input-14 CN123-3 3 Extension p.c.b. (IPOP p.c.b.) CN123
44 opi14 Optional input-15 CN123-4 2 Extension p.c.b. (IPOP p.c.b.) CN123
45 opi15 Optional input-16 CN123-4 3 Extension p.c.b. (IPOP p.c.b.) CN123
46 opo8 Input of optional output-9 — — Output signal of optional output-9 can be internally inputted.
47 opo9 Input of optional output-10 —— Output signal of optional output-10 can be internally inputted.
48 opo10 Input of optional output-11 —— Output signal of optional output-11 can be internally inputted.
49 opo11 Input of optional output-12 —— Output signal of optional output-12 can be internally inputted.
50 opo12 Input of optional output-13 —— Output signal of optional output-13 can be internally inputted.
51 opo13 Input of optional output-14 —— Output signal of optional output-14 can be internally inputted.
52 opo14 Input of optional output-15 —— Output signal of optional output-15 can be internally inputted.
53 opo15 Input of optional output-16 —— Output signal of optional output-16 can be internally inputted.
(Caution) 1. Port input codes 38 to 45 can be used only when IPOP p.c.b. is mounted.
2. Operation of port input codes 9 to 16, and 46 to 53 is the function that can use as the signal in
the program where output can be internally used as input signal when optional output written
in the function is used.