PREFACE
This Engineer’s Manual is written for the technical personnel who are responsible for the service and maintenance
of the machine.
The Instruction Manual for these machines intended for the maintenance personnel and operators at an apparel
factory contains operating instructions in detail. And this manual describes “Standard Adjustment”, Adjustment
Procedures”, “Results of Improper Adjustment”, and other important information which are not covered in the
Instruction Manual.
It is advisable to use the instruction Manuals and Parts Lists for SC-510/M51, IP-100E/SC-510, and CP-160C
together with this Engineer’s Manual when performing maintenance of these machines.
This manual gives the “Standard Adjustment” on the former page under which the most basic adjustment value is
described and on the latter page the “Results of Improper Adjustment” under which stitching errors and troubles
arising from mechanical failures and “How To Adjust” are described.
To Next Page
Loading...
