– 42 –
3) Press the switch to enter a data file number. Entered number appears at . After number entry, press
the switch to return to the communication configuration screen.
4) When there is a data file with a number that is the same number entered into SmartMedia, the screen for
confirming data file overwriting appears as shown below. To permit overwriting, press the switch to return
to the communication configuration screen. To prohibit overwriting, press the switch to return to the data
file No. entry screen.
■ Screen for confirming data file overwriting
5) To delete a data file in SmartMedia, press the switch after entry of the data file number to call up the
screen for confirming data file deleting as shown below.
■ Screen for confirming data file deleting
To Next Page
Loading...
