– 45 –
3) Press the switch to enter a data file number. Entered number appears at . After number entry, press
the switch to return to the communication configuration screen.
To delete a data file in SmartMedia, press the switch after entry of the data file number to call up the
screen for confirming data file deleting as shown below.
■ Screen for confirming data file deleting
4) Press the switch to delete entered data file number and return to the data file No. entry screen. To stop
deleting and return to the data file No. entry screen, press the switch .
5) For example, the illustration below shows the communication configuration screen with data file No. 5 en-
tered.
6) After all settings, press the switch to start downloading data into SC-510. The illustration on the previous
page appears during downloading.
To Next Page
Loading...
