– 55 –
4) One-shot automatic stitching setting function (Func-
tion setting No. 76)
Press / switch to advance to the
function setting No. 76.
It is possible to change the set value with switch
or switch .
0 : Pedal designated speed is prior.
1 : Automatic operation
(Caution) 1. It is rendered effective when the mate-
rial end sensor function is set.
It is not possible to prohibit the oneshot
operation at the time of the overlapped
stitching operation.
2. Speed of rotation is the speed set at the
function setting No. 38.
When “1” is selected, the oneshot
automatic stitching display lights
up when the mode is returned to
the normal one.
5) Thread trimming prohibition function setting (Func-
tion setting No. 9)
Thread trimming operation at normal stitching and
overlapped stitching can be prohibited by selecting
the thread trimming prohibition.
Press / switch to advance to the
function setting No. 9.
It is possible to change the set value with switch
or switch .
0 : Thread trimming is effective.
1 : Thread trimming is prohibited.
When “1” is selected, the thread
trimming prohibition display lights
up when the mode is returned to
the normal one.
a
a
To Next Page
Loading...
