– 57 –
4. When you want to advance the setting No., press
switch to advance the setting No.
When you want to return the setting No., press switch
to return the setting No.
(Caution)
1. When switch (switch ) is held pressing,
the setting No. will return (will advance) con-
tinuously.
2. When the setting No. is advanced (returned),
the contents which are before by one (after by
one) will be determined.
So, be careful when changing the contents (up/
down switch is touched).
EXAMPLE) CHANGING THE FLICKER REDUCING
FUNCTION (SETTING No. 5)
Press switch five times to set the setting No. to “5”.
Existing set value is displayed in LED . (Standard is
“0”.) Press switch three times to change to “3”.
(Caution) Keep pressing switch or switch , and
the setting value can be changed continu-
ously.
5. When the change has been completed, press switch
or to specify the changed value.
(Caution)
1. When turning OFF the power before perform-
ing this work, the contents which have been
changed are not updated.
2. Press switch , and screen display will
change to the contents of the setting No. which
is before by one.
3. Press switch , and screen display will
change to the contents of next setting No. Af-
ter completing the operation, turn OFF the
power and turn ON the power again to return
to the normal operation.
After completing the operation, turn OFF the power and
turn ON the power again to return to the normal
Specified No.
* When simultaneously pressing switch and switch , the value returns to the initial value.
To Next Page
Loading...
