Operator's responsibility - safety instructions
When using hazardous substances or substances which may be
hazardous, the operator must apply the enclosed safety symbols (1 + 2a
or 2b) on the control side panel where they are clearly visible:
Safety symbols Description
Warning of a danger zone. Note operating
manual
Warning about hot surface
Warning of cold surface
Read operating manual before switching on
If external units are connected
Refer to the instructions in the manuals for the external units which you
connect to the JULABO unit, particularly the safety instructions.
The connection assignment of the plugs and the technical data for the
products must be observed at all times.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
