Commissioning
10 Commissioning
Danger from mains voltage.
Risk of injury from electric power.
• Compare the mains voltage and frequency with the details on the
model plate.
• Connect the device only to a safe power supply via FI-circuit
breaker (IA = 30 mA).
• The device may only be connected to power outlets with a ground
contact (PE – protective earth).
• The mains plug serves as a safe disconnecting device from the
power supply network and must be freely accessible at all times.
• Do not start the device if it has a damaged mains cable.
• Check the mains cable regularly for signs of damage.
• We disclaim all liability for damage caused by incorrect line
voltages!
Commissioning the circulator with a refrigeration machine
Connect the circulator and refrigeration machine using the mains lead.
Connect them to the voltage supply using the fitted plug on the
refrigeration machine and the mains lead. Connect the CAN jacks on
both devices with the CAN connection cable to transfer data.
Cold or hot device surfaces
Frostbit or burns
What should be observed when operating the JULABO
temperature control unit?
• Unit parts may develop high surface temperatures. A hot surface
means it has a temperature of 60 °C / 140 °F or more.
• Let the device cool down to an uncritical safe temperature.
• Use safety gloves.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
