Control and function elements
7.1 Installation of the circulator
Danger of scalding due to leaks from the baths
The JULABO plastic baths are not solvent-resistant. JUALBO plastic
bath tanks are for water at a working temperature range from +20°C
to +100°C.
Do not contaminate the bath fluid with solvents.
Things to keep in mind during the installation process:
Risk of tipping due to improper transportation
Crushing, damage to the unit
• Use PPE (safety gloves, safety shoes, safety goggles).
• Carry the unit with 2 persons (see the Technical Data for the
weight).
• Transport the unit carefully on firm, level ground. The interior of
the unit can also be damaged by impacts or if it is dropped.
• Do not loiter under the unit during transportation and
operation.
• The installation site should be a sufficiently large room to
ensure that it does not become too hot due to the heat
emission.
• The surface for the device should be flat and made of non-
flammable material.
• A specific room size is prescribed for refrigerated circulators.
• At high temperatures, position the unit under an exhaust hood
as much as possible due to potential vapors from the thermal
bath fluid.
• Observe the safety sticker - do not remove!
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
