Julabo CORIO CD - Table of Contents

Table of contents
1 CORIO
®
CD product overview .............................................................. 5
2 Intended use ......................................................................................... 6
3 Description ............................................................................................ 7
4 Explanation of safety information ..................................................... 8
4.1 Explanation of other information ............................................................ 8
5 Safety instructions ............................................................................... 9
6 Operator's responsibility - safety instructions ................................ 11
6.1 Requirements for the operating personnel ............................................ 11
6.2 Operating and ambient conditions for using the unit ............................ 11
6.3 Operating the unit ................................................................................. 12
7 Control and function elements ......................................................... 14
7.1 Installation of the circulator .................................................................. 17
8 Preparations for operating the device ............................................. 18
8.1 Securing the immersion circulator ......................................................... 18
8.2 Open bath tanks .................................................................................... 22
9 Closed stainless steel bath tanks ...................................................... 25
9.1 Basic refrigeration baths ....................................................................... 26
9.2 Bath fluids ............................................................................................. 27
9.3 Temperature control for external connected systems ............................ 29
9.4 Tubing ................................................................................................... 30
10 Commissioning .................................................................................... 31
10.1 Excess temperature and low level safety devices .................................. 32
10.2 Filling .................................................................................................... 33
10.3 Pump settings ....................................................................................... 33
10.4 Switching on / Start - Stop .................................................................... 34
10.5 Setting the desired temperature value .................................................. 34
10.6 Setting the timer ................................................................................... 35
10.7 ATC - Absolute Temperature Calibration (1-point calibration) .............. 36
10.8 Switch Autostart on and off .................................................................. 37
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com