MC
7
Permissible ambient temperature: max. 40 °C, min. 5 °C.
Permissible relative air humidity: 50 % (40 °C).
Do not store in an aggressive atmosphere. Protect from contaminations. Do not expose
to sunlight.
Operation:
Only qualified personnel is authorized to perform configuration, installation,
maintainance and repairs of the circulator.
Routine operation can also be carried out by untrained personnel who should however
be instructed by trained personnel. The summarized user guidance (short manual) and
the specification table with information on individual parameters are sufficient for this.
Use:
The bath can be filled with flammable materials. Fire hazard!
There might be chemical dangers depending on the bath medium used.
Observe all warnings for the used materials (bath fluids) and the respective instructions
(safety data sheets).
Insufficient ventilation may result in the formation of explosive mixtures. Only use the
unit in well ventilated areas.
Only use recommended materials (bath fluids). Only use non-acid materials.
When using hazardous materials, the user must attach the enclosed safety labels to the
front of the unit so they are well visible: The yellow warning label W09 (danger area)
and the blue mandatory label M018 or Semi S1-0701 Table A1-2 #9 (Carefully read the
user information prior to beginning operation).
Warning label W09:
Colours:
yellow, black
Danger area.
Attention! Observe instructions.
(operating manual, safety data sheet)
Mandatory label
M018
Colours: blue, white
Carefully read the user information prior to
beginning operation
Scope: EU
Semi S1-0701
Table A1-2 #9
Carefully read the user information prior to
beginning operation
Scope: NAFTA
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
