MC
27
5. Setting the temperatures
è
The function of the key is configurable.
1. If the key is pressed, normally only one adjustable working
temperature is displayed (factory setting).
2. Press the button to call up the menu , then
assign a menu with 3 pre-adjustable setpoints to the
key. (see page 39)
5.1. 1-setpoint mode
Example: Actual value
Setpoint ê
è
è
Actual value ê
è
1. Press the key. The setpoint value instead of the actual
value is indicated on the display. The value can now be
changed.
2. Change the value: (Example: 30.0 °C to 65.0 °C)
• Use the cursor keys to move left or right on the
display until the numeral you wish to change blinks.
• Use the increase/decrease arrows to change the
selected numeral (-, 0, 1, 2, 3, ... 9).
3. Press enter to store the value.
i Setting can be carried out in the start/stop condition.
5.2. 3-setpoint mode
Factory settings:
25 °C
37 °C
70 °C
Press the key to call up the menu for temperature
selection.
3 different working temperatures are adjustable. Their values
are freely selectable within the operating temperature range.
i Setting can be carried out in the start/stop condition.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
