Cleaning the unit, Maintenance
40
13. Cleaning the unit, Maintenance
Before cleaning the unit, disconnect the power plug from the mains socket!
Prevent humidity from entering into the circulator.
For cleaning the bath tank and the immersed parts of the circulator, use low surface
tension water (e.g., soap suds).
Clean the outside of the unit using a wet cloth and low surface tension water
The circulator is designed for continuous operation under normal conditions. Periodic
maintenance is not required.
The tank should be filled only with a bath liquid recommended by JULABO. To avoid
contamination, it is essential to change the bath liquid from time to time.
Repairs
Before asking for a service technician or returning a JULABO circulator for
repair, please contact an authorized JULABO service station.
When returning a unit, take care of careful and adequate packing. JULABO is not
responsible for damages that might occur from insufficient packing.
JULABO reserves the right to carry out technical modifications with repairs for
providing improved performance of a unit.
To Next Page
Loading...
