45
15. Warranty conditions
JULABO USA, Inc. warrants its products against defects in material or in workmanship, when used
under appropriate conditions and in accordance with appropriate operating instructions for a period of
no less than
TWO (2) YEARS
or a maximum of ten thousand hours (10,000), whichever comes first, from the date of delivery of the
products. To avoid forfeiture of the warranty and to allow JULABO to be of continuing service to the
scientific community, the record of the purchase is required to be returned to JULABO or one of its
authorized representatives within 30 days of receipt of equipment.
JULABO’s sole obligation shall be to repair or to replace at JULABO’s option, F.O.B. its plant or
locally, without charge, any part(s) that prove defective within the warranty period, providing the
customer notifies JULABO promptly and in writing of any such defect. Compensation for labor other
than Julabo’s employees will not be JULABO’s obligation. Part(s) replacement does not constitute an
extension of the original warranty period.
JULABO will not assume responsibility for unauthorized product modifications, or for repairs,
replacements, or modifications negligently or otherwise improperly made or performed by persons other
than JULABO employees or authorized representatives.
JULABO MAKES NO WARRANTY OR MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, AS TO
THE DESIGN, SALE, INSTALLATION, OR USE OF ITS PRODUCTS, AND SHALL NOT BE
LIABLE FOR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF ITS
PRODUCTS.
While JULABO’s personnel or that of its authorized representatives are available to advise customers
concerning general applications of all manufactured products, oral representations are not warranties
with respect to particular applications, and should not be relied upon if inconsistent with product
specifications or the terms stated herein.
All glassware, such as reference thermometers, etc, are expressly excluded from this warranty
declaration.
In any event, the terms and conditions contained in JULABO’s formal sales contracts shall be controlling
and any change must be in writing and signed by an authorized executive of JULABO USA, Inc.
To Previous Page
Loading...
