Julabo ME - 9.4. MENU CONFIG - Configuration of unit

Menu functions
34
9.4. MENU CONFIG – Configuration of unit
Menu level 1

L A RESET can be effected only in the >OFF< mode.
Switch off circulator by pressing the
key and call up the menu
CONFIGURATION.
Level 2 Parameter level
L Press the key if a parameter is to be
retained. Correction function for parameters and
values (prior to OK).

or
• Switch on and off remote control by pressing
and
L Control display in the topline
for Remote
L For remote control refer to 55
L Connect RS232 with PC.

or
• Switch on and off autostart by pressing
and
AUTOSTART on = on
AUTOSTART off = off
See WARNING page 35

or
• Switch on and off OFFMODE by pressing
and
PUMP ON continuous operation of circulating pump
PUMP OFF circulating pump is linked to Start/Stop
Level 3 Parameter level


• Hours flash, set by pressing
+
• Minutes flash, set by pressing
+

• Day flashes, set by pressing
+
• Month flashes, set by pressing
+