Julabo ME User Manual

19510506.doc 24.01.11
Operating Manual
ME
English
Heating Circulators
ME-4
ME-6
ME-12
ME-26
Printed in Germany
Changes without prior notification reserved
1.951.0506 01/11
JULABO Labortechnik GmbH
77960 Seelbach / Germany
 +49 (0) 7823 / 51-0
 +49 (0) 7823 / 24 91
| info@julabo.de
Þ www.julabo.de

Julabo ME Specifications

General

Brand	Julabo
Model	ME
Category	Heating System
Language	English

Summary

The JULABO Quality Management System

Unpacking and inspecting

Procedure for unpacking the circulator and accessories and inspecting for transport damage.

Operating manual

1. Intended use

Defines the specific fluids and applications for which JULABO circulators are designed.

1.1. Description

Operator responsibility – Safety recommendations

Safety instructions for the operator

Guidelines for safe operation, including personnel qualification and hazard awareness.

Safety installations according to IEC 61010-2-010

3. Safety notes for the user

3.1. Explanation of safety notes

Defines warning symbols and signal words used throughout the manual.

3.3. Safety recommendations

4. Operating controls and functional elements

4.1. Circulator

5. Preparations

5.1. Installation

6. Operating procedures

6.1. Power connection

6.2. Switching on / Start - Stop

7. T Setting of temperatures

7.1. Using the pre-settings in the T menu

7.2. Direct setting of temperatures

8. Safety installations, warning functions

8.1. Excess temperature protection

Details on setting and function of the excess temperature protection feature.

8.1.1. Early warning system, low level protection

8.2. Switch-over from warning to shutdown function

8.3. Over and Sub temperature warning function

9.1. MENU PROGRAM – START

9.4. MENU CONFIG – Configuration of unit

9.5. MENU CONTROL – Control characteristics and parameters

9.5.1. CONTROL – Control INTERNAL / EXTERNAL

9.7. MENU ATC - Absolut Temperature Calibration

9.7.3. CALIBRATION TYPE: 1 - 2 -/ 3 POINT

9.7.1. ATC SENSOR - INTERNAL / EXTERNAL

9.7.2. ATC STATUS - YES / NO

9.8.1. Limits for internal control

9.8.2. Limits for external control

10. Troubleshooting guide / error messages