JUMO diraTRON Series User Manual

35
4 Operation
ST code version
Version of the "ST code" extra code
Hardware version
Device hardware version
4.8.2 Service
The counters are configured using the setup program (Setup only > Service):
Service counter
Service counter reading
Operating time
Operating hours counter reading
Default setting
The device can be reset to the default settings in this menu item. To do so, press the "Menu/OK" button
for at least 5 seconds.
The device is automatically restarted once the default settings are applied.

JUMO diraTRON Series Specifications

General

Brand	JUMO
Model	diraTRON Series
Category	Controller
Language	English