JUMO diraTRON Series User Manual

5 Program editor
40
Example 2: Setpoint ramp
The setpoint value programmed in a section (e.g. 20 in section 1) changes gradually during that section
to the setpoint value of the next section (e.g. 100 in section 2). This produces a course in a ramp shape.
For a setpoint value to remain constant in a section (e.g. 100 in section 2), the same setpoint value must
be specified for the next section (e.g. 100 in section 3).

JUMO diraTRON Series Specifications

General

Brand	JUMO
Model	diraTRON Series
Category	Controller
Language	English