JUMO LOGOSCREEN 600 - Page 80

6 Annex
80
Reset the texts
The entered batch texts are reset. The default texts are shown and the first line is prepared
again for the text input.
The default text is defined in the configuration of the batch line (Configuration > Batch > Batch
line: Default text).
Start the batch reporting
The batch reporting is started.
Stop the batch reporting
The batch reporting is stopped.
In the current batch report, depending on the configuration of the batch line, texts that have
been read via barcode are either reset to the default text (Configuration > Batch > Batch line:
Delete line = Yes) or maintained.
In the completed batch report, the texts are saved.
Step Activity
1 Scan the RESET barcode.
RESET
Step Activity
1 Scan the START barcode.
ST ART
Step Activity
1 Scan the STOP barcode.
ST OP