8 Device Manager
68
8.5 Configuration
This function can be used to alter the configuration of the recorder.
v B706581.0.
8.6 Parameterization
For parameterization, some functions will not be available if no user is logged
in, or the user who is logged in does not have the access rights for these
functions.
Only the setting of individual current batch numbers is enabled in the factory
(default) setting.
v B706581.0.
An alteration of the configuration results in the current recording
being closed down and the new data being recorded in a separate
time frame from the “old” data. It is not possible to present the
data before reconfiguration and the data after reconfiguration as a
single entity. The instrument works with a new configuration.
To Next Page
Loading...
