9 Entering text and values
74
9.1.7 Reject entry
h Select the “Cancel” button ( ) and press the control knob.
Character entry will now be ended. The text that was entered is not accepted,
and the dialog window is closed. The previously active setting is retained.
9.2 Entry via selection field
If a selection field is selected, and then activated by pressing the control knob,
then the text (value) can be entered from a previously defined list.
The cursor (position marker) is on the current setting.
h Make the selection by rotating and pressing the control knob.
To Next Page
Loading...
Need help?
General
