EasyManuals Logo

Jungheinrich ECR 336 User Manual

Jungheinrich ECR 336
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
0705.USA
E 6
2.2 Driving, steering, braking
QwW Extra care must be taken when driving and steering, especially outside the
perimeter of the vehicle.
In ride-on mode, keep an adequate distance from the vehicle.
Emergency stop
Pull out the battery connector (19).
All electrical functions are switched off. The magnetic brake is applied and brakes the
vehicle with the highest brake step.
Driving
IMPORTANT Do not drive the vehicle unless all covers are closed and properly locked.
The main direction of travel is travel in the tiller direction (V). Extra care must
be taken when traveling in the load direction (R).
NOTICE Travel in the load direction (R) should be limited to shunting and to picking up
and setting down loads.
Prepare for operation (see Section 2.1).
Move the tiller (6) in the travel range "F".
Turn the travel regulator (8) in the desired direction of travel (forward (V) or
backward (R)).
The vehicle starts moving in the chosen direction. The speed of travel is controlled
with the travel regulator (8). The maximum speed is 5.6 km/h (3.5 mph). If the high-
speed button (16) is held down (t) in ride-on mode, the maximum speed of travel is
15 km/h (9.3 mph) in the tiller direction (V) and 9 km/h (5.6 mph) in the fork direction
(R).
R
R
V
8
6
13
19
16
F
V
B
B

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ECR 336 and is the answer not in the manual?

Jungheinrich ECR 336 Specifications

General IconGeneral
BrandJungheinrich
ModelECR 336
CategoryTrucks
LanguageEnglish

Related product manuals