EasyManuals Logo

Jungheinrich ECR 336 User Manual

Jungheinrich ECR 336
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
G 17
0307.USA
7.2 Measures required during the shutdown period
Every two months:
Charge the battery (see "Charging the battery" in Chapter F).
IMPORTANT Battery-powered trucks:
Regular charging of the battery is very important; otherwise spontaneous
discharge could lead to total discharge of the battery. This would result in
battery failure due to sulfation.
7.3 Restarting the vehicle after shutdown
Clean the truck thoroughly.
Grease the truck in accordance with the lubrication chart
(see "Lubrication chart" in Chapter G).
Clean the battery. Grease the pole screws with pole grease and reconnect the
battery.
Charge the battery (see "Charging the battery" in Chapter F).
Check whether there is condensation water in the gearbox oil and replace it if
necessary.
Check whether there is condensation water in the hydraulic oil and replace it if
necessary.
Start the vehicle
(see "Starting the vehicle" in Chapter E).
IMPORTANT Battery-powered trucks:
In the event of contact problems in the electrical system, spray the exposed
contacts with contact spray and operate the controls repeatedly to remove
any oxide film on the control contacts.
QwW Test the brakes several times immediately after starting up the vehicle.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ECR 336 and is the answer not in the manual?

Jungheinrich ECR 336 Specifications

General IconGeneral
BrandJungheinrich
ModelECR 336
CategoryTrucks
LanguageEnglish

Related product manuals