Jungheinrich EJC 214 - Using the Keypad

8.13 Using the Keypad
8.13.1 Switch on the truck with the access code.
Procedure
• Release the emergency disconnect switch, see
page 87.
• Enter the access code with the keypad (98).
The truck is switched on.
98
Procedure
• Press the key under the "Switch off" symbol (105) in the display unit.
• Press the Emergency Disconnect switch, see page 87.
The truck is switched off.
8.13.2 Switching off the truck
Procedure
• Press the key under the "Switch off" symbol (105) in the
display unit.
• Press the Emergency Disconnect switch, see page 87.
The truck is switched off.
105
165
04.19 en-GB