4.5 Slow travel
CAUTION!
Risk of accident if the service brake is deactivated
Particular care and attention is required by the operator during slow travel. The
service brake is deactivated during slow travel and is only reactivated after the "slow
travel" button is released.
u
In hazardous situations brake by immediately releasing the "slow travel" button
and the travel switch.
u
During slow travel you can only brake by coating braking.
Z
The truck can be operated with an upright tiller (13) (e. g. in confined spaces /
elevators).
Switch on the slow travel function
Procedure
• Press and hold down the "slow travel" button (12).
• Rotate the travel switch (5) in the required travel direction.
The brake is released. The truck travels at slow speed.
Switching off slow travel
Procedure
• Release the "slow travel" button (12).
If the tiller is in brake zone "B", the brake
applies and the truck stops.
If the tiller is in brake zone "F" the truck
continues at slow travel speed.
• Release the travel switch (5).
Slow travel ends and the truck can now travel again at normal speed.
93
04.19 en-GB
To Next Page
Loading...
