2.2 Customer Service
2.2.1 Maintenance contents
In accordance with the EJC 214/216 service interval, to be performed every 1000
service hours, but at least once a year.
2.2.1.1 Standard equipment
Brakes
Test the brake with the tiller in the maximum vertical and horizontal positions.
Measure the air gap of the magnetic brake.
Electrical system
Test the contactors and/or relays.
Carry out a chassis insulation-resistance test.
Clean the motor (engine?) with compressed air.
Chassis/structure
Check that the panels and covers as well as mounting brackets are secure. Ensure they
function correctly and are safe.
Hydraulic operations
Adjust the slide pieces.
Adjust the load chains.
Lubricate the load chains.
Test emergency lowering.
Correct the hydraulic oil level.
Test the pressure relief valve.
Agreed services
Carry out a test run with the rated load or a customer-specific load.
Demonstration after maintenance.
Lubricate truck according to the lubrication diagram.
Steering
Test the tiller return function.
215
04.19 en-GB
To Next Page
Loading...
