5 Decommissioning the Industrial Truck
If the truck is to be out of service for more than a month, it must be stored in a frost-
free and dry room. All necessary measures must be taken before, during and after
decommissioning as described hereafter.
When the truck is out of service it must be jacked up so that all the wheels are clear
of the ground. This is the only way of ensuring that the wheels and wheel bearings
are not damaged.
Z
Jack up the truck, see page 186.
If the truck is to be out of service for more than 6 months, agree further measures
with the manufacturer's customer service department.
5.1 Prior to decommissioning
Procedure
• Thoroughly clean the truck, see page 187.
• Prevent the truck from rolling away accidentally.
• Check the hydraulic oil level and replenish if necessary, see page 190.
• Apply a thin layer of oil or grease to any non-painted mechanical components.
• Lubricate the truck according to the lubrication schedule, see page 182.
• Charge the battery, see page 55.
• Disconnect the battery, clean it and grease the terminals.
Z
In addition, follow the battery manufacturer’s instructions.
5.2 Action to be taken during decommissioning
NOTICE
Full discharge can damage the battery
Self-discharge can cause the battery to fully discharge. Full discharge shortens the
useful life of the battery.
u
Charge the battery at least every 2 months.
Z
Charge the battery, see page 55.
196
04.19 en-GB
To Next Page
Loading...
Need help?
General
