Jungheinrich EKS 310 User Manual

E 11
0206.GB
4 Starting up the truck
F
Before the truck can be put into operation, operated or a load unit lifted, the driver
must ensure that there is nobody within the danger area.
Checks and operations to be performed before starting daily work
– Check the entire truck on the outside for signs of visible damage and leaks.
– Check the battery attachment and wire connections for damage, make sure they
are secure.
– Check the battery connector is fixed.
– Check the overhead guard for damage.
– Check the load lifting device for visible damage such as cracks, bent or severely
worn load forks.
– Check the load wheels for damage.
– Make sure the load chains are evenly tensioned.
– Make sure all safety mechanisms are correct and functional.
– Test the operating and parking brake.
– Check the brake fluide.
– For rail guidance systems check the guidance rollers are smooth and check for
damage.
F
It is forbidden for more than one person to enter the driver’s cab at a time.
Preparing the truck for operation
– Close the safey gates securely on both sides.
– Turn the EMERGENCY DISCONNECT switch (1) to undo it.
– Insert the key in the keyswitch (9) and turn it clockwise.
– Test the warning device (horn).
– Test the operating and parking brake.
– Carry out a test movement of the lift mast to adjust the height display.
F
Press the EMERGENCY DISCONNECT switch immediately if the truck starts to
move or lift when it is switched on.
1
9
E 11
0206.GB
4 Starting up the truck
F
Before the truck can be put into operation, operated or a load unit lifted, the driver
must ensure that there is nobody within the danger area.
Checks and operations to be performed before starting daily work
– Check the entire truck on the outside for signs of visible damage and leaks.
– Check the battery attachment and wire connections for damage, make sure they
are secure.
– Check the battery connector is fixed.
– Check the overhead guard for damage.
– Check the load lifting device for visible damage such as cracks, bent or severely
worn load forks.
– Check the load wheels for damage.
– Make sure the load chains are evenly tensioned.
– Make sure all safety mechanisms are correct and functional.
– Test the operating and parking brake.
– Check the brake fluide.
– For rail guidance systems check the guidance rollers are smooth and check for
damage.
F
It is forbidden for more than one person to enter the driver’s cab at a time.
Preparing the truck for operation
– Close the safey gates securely on both sides.
– Turn the EMERGENCY DISCONNECT switch (1) to undo it.
– Insert the key in the keyswitch (9) and turn it clockwise.
– Test the warning device (horn).
– Test the operating and parking brake.
– Carry out a test movement of the lift mast to adjust the height display.
F
Press the EMERGENCY DISCONNECT switch immediately if the truck starts to
move or lift when it is switched on.
1
9

Jungheinrich EKS 310 Specifications

General

Brand	Jungheinrich
Model	EKS 310
Category	Forklifts
Language	English