F 3
0708.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the forklift truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
M
The application conditions of an industrial truck considerably affect the wear levels of
the service components.
We recommend an application analysis carried out on site by a Jungheinrich
customer adviser to establish specific maintenance intervals in order to restrict
damage caused by wear.
The service intervals listed are based on single shift operation under normal
operating conditions. They must be reduced accordingly if the truck is to be used in
conditions of heavy dust, temperature fluctuations or multiple shifts.
The following service checklist indicates the tasks to be performed and the respective
intervals to be observed. The service intervals are defined as follows:
W = Every 50 service hours, at least weekly
A = Every 500 operating hours
B = Every 1000 operating hours, or at least annually
C = Every 2000 operating hours, or at least annually
Z
W service intervals are to be performed by the customer.
F 3
0708.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the forklift truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
M
The application conditions of an industrial truck considerably affect the wear levels of
the service components.
We recommend an application analysis carried out on site by a Jungheinrich
customer adviser to establish specific maintenance intervals in order to restrict
damage caused by wear.
The service intervals listed are based on single shift operation under normal
operating conditions. They must be reduced accordingly if the truck is to be used in
conditions of heavy dust, temperature fluctuations or multiple shifts.
The following service checklist indicates the tasks to be performed and the respective
intervals to be observed. The service intervals are defined as follows:
W = Every 50 service hours, at least weekly
A = Every 500 operating hours
B = Every 1000 operating hours, or at least annually
C = Every 2000 operating hours, or at least annually
Z
W service intervals are to be performed by the customer.
To Next Page
Loading...
Need help?
General
