E 13
0206.GB
5.2 Travelling, Steering, Braking
EMERGENCY DISCONNECT
– Press the EMERGENCY
DISCONNECT switch (1) down.
All truck movements are inhibited.
The switch operation must not be
affected by any objects placed in its
way.
Travelling
The truck can be driven in 3 modes:
Free travel in apron, with wire or rail
guidance.
The operating mode used depends on
the guidance system of the racking
system operated.
M
Do not drive the truck unless the panels are closed and properly locked.
The foot switch must be kept depressed for travel.
Travelling in apron field
– Close the safety gates.
– Turn the EMERGENCY
DISCONNECT switch (1) to undo it.
– Insert the key in the keyswitch and
turn clockwise; the “operational”
display lamp goes on.
– Apply the foot switch (21).
– Carry out a test run, see Seite E9.
1
21
21
E 13
0206.GB
5.2 Travelling, Steering, Braking
EMERGENCY DISCONNECT
– Press the EMERGENCY
DISCONNECT switch (1) down.
All truck movements are inhibited.
The switch operation must not be
affected by any objects placed in its
way.
Travelling
The truck can be driven in 3 modes:
Free travel in apron, with wire or rail
guidance.
The operating mode used depends on
the guidance system of the racking
system operated.
M
Do not drive the truck unless the panels are closed and properly locked.
The foot switch must be kept depressed for travel.
Travelling in apron field
– Close the safety gates.
– Turn the EMERGENCY
DISCONNECT switch (1) to undo it.
– Insert the key in the keyswitch and
turn clockwise; the “operational”
display lamp goes on.
– Apply the foot switch (21).
– Carry out a test run, see Seite E9.
1
21
21
To Next Page
Loading...
