Jungheinrich EKS 310 - Cleaning the Discharge Filter; Replacing the Hydraulic Oil Filter

F 11
0708.GB
5.5 Cleaning the discharge filter
Unscrew the discharge filter and the oil
dipstick (5) and clean with compressed
air or a cleaning agent.
M
Dispose of used filters in the correct
manner.
5.6 Replacing the hydraulic oil filter
– Unscrew the hydraulic oil filter sealing
cap (6).
– Replace filter insert and O ring.
Apply a thin layer of oil to the O-ring on
installation.
– Screw the sealing cap back on.
5
6
F 11
0708.GB
5.5 Cleaning the discharge filter
Unscrew the discharge filter and the oil
dipstick (5) and clean with compressed
air or a cleaning agent.
M
Dispose of used filters in the correct
manner.
5.6 Replacing the hydraulic oil filter
– Unscrew the hydraulic oil filter sealing
cap (6).
– Replace filter insert and O ring.
Apply a thin layer of oil to the O-ring on
installation.
– Screw the sealing cap back on.
5
6