To Next Page

To Previous Page

B 3

0502.GB

2.1 Truck

Construction: The HC is a four-wheeled vehicle incorporating two steering wheels

(11) and two load-bearing wheel arms (8). An easily opened cover gives very good

access to all units. The operating controls are located on top of the cover.

Safety features:

– The wheel guard (9) protects the operator’s feet.

Operating controls and indicators: The operating controls for raising and lowering

the fork are located on the cover.

The vehicle is fitted with a battery monitor (1).

Steering system: The truck is steered using the control shaft (4). The steering range

is approx. 90° to either side. A connecting rod transfers the steering movements to

the two steering wheels.

Brake system: One of the steering wheels (10) is fitted with a parking brake (11)

which is operated by a brake pedal (12).

Hydraulic system: The functions raising and lowering are controlled using the oper-

ating lever (3). When the lifting function is activated, the pump unit starts up. Hydraulic

oil is pumped from the oil reservoir into the cylinder. The load lifting device 6) is lifted.

Electrical system: 24 Volt system.

B 3