Jungheinrich HC 10 User Manual

0502.GB
D 21
18 Battery Monitor (o)
The charge status of the battery is shown by the
light-emitting diode (12) once the key switch has
been turned on.
Light-emitting diode (12) steady green:
– Normal condition, battery voltage 1,7 V per cell.
Light-emitting diode (12) flashes red:
– It is recommended that the batteries be
charged; battery voltage is between 1,7 V and
1,5 V per cell.
Light-emitting diode (12) steady red:
– It is essential that the batteries are charged, battery voltage is < 1,5 V per cell.
12
0502.GB
D 21
18 Battery Monitor (o)
The charge status of the battery is shown by the
light-emitting diode (12) once the key switch has
been turned on.
Light-emitting diode (12) steady green:
– Normal condition, battery voltage 1,7 V per cell.
Light-emitting diode (12) flashes red:
– It is recommended that the batteries be
charged; battery voltage is between 1,7 V and
1,5 V per cell.
Light-emitting diode (12) steady red:
– It is essential that the batteries are charged, battery voltage is < 1,5 V per cell.
12

Jungheinrich HC 10 Specifications

General

Brand	Jungheinrich
Model	HC 10
Category	Forklifts
Language	English