Juniper EX2500 Configuration Guide

EX2500 Ethernet Switch Configuration Guide
8  Using SNMP
SNMPv3
SNMPv3 is an enhanced version of the Simple Network Management Protocol,
approved by the Internet Engineering Steering Group in March, 2002. SNMPv3
contains additional security and authentication features that provide data origin
authentication, data integrity checks, timeliness indicators, and encryption to
protect against threats such as masquerade, modification of information, message
stream modification, and disclosure.
SNMPv3 ensures that the client can use SNMPv3 to query the MIBs, mainly for
security.
For more information on SNMP MIBs and the commands used to configure SNMP
on the switch, see the EX2500 Ethernet Switch Command Reference.
Default Configuration
The EX2500 switch has two SNMPv3 users by default. Both of the following users
have access to all the MIBs supported by the switch:
1. username 1: adminmd5 (password adminmd5). Authentication used is MD5.
2. username 2: adminsha (password adminsha). Authentication used is SHA.
To configure an SNMP username, enter the following command from the CLI:
ex2500(config)# snmp-server user <1-16> name <1-32>
User Configuration
Users can be configured to use the authentication and privacy options. The EX2500
switch supports two authentication algorithms: MD5 and SHA, as specified in the
following command:
ex2500(config)# snmp-server user <1-16> authentication-protocol md5 | sha
1. To configure a user with name admin, authentication type MD5, authentication
password
admin, and privacy option DES with a privacy password of admin, use
the following CLI commands:
ex2500(config)# snmp-server user 5 name admin
ex2500(config)# snmp-server user 5 authentication-protocol md5
authentication-password
Changing authentication password; validation required:
Enter current admin password: <admin. password>
Enter new authentication password: <auth. password>
Re-enter new authentication password: <auth. password>
New authentication password accepted.
ex2500(config)# snmp-server user 5 privacy-protocol des privacy-password
Changing privacy password; validation required:
Enter current admin password: <admin. password>
Enter new privacy password: <privacy password>
Re-enter new privacy password: <privacy password>
New privacy password accepted.

Juniper EX2500 Specifications

General

Brand	Juniper
Model	EX2500
Category	Switch
Language	English