WARNING: Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação
que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer
equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e
com quaisquer práticas comuns que possam prevenir possíveis acidentes.
WARNING: ¡Atención! Este símbolo de aviso significa peligro. Existe riesgo para su
integridad física. Antes de manipular cualquier equipo, considerar los riesgos que
entraña la corriente eléctrica y familiarizarse con los procedimientos estándar de
prevención de accidentes.
WARNING: Varning! Denna varningssymbol signalerar fara. Du befinner dig i en
situation som kan leda till personskada. Innan du utför arbete på någon utrustning
måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande
för att förebygga skador.
Related Topics ■ Warning Statement for Norway and Sweden for EX Series Switches on page 150
■ General Safety Guidelines and Warnings for EX Series Switches on page 145
■ Installation Instructions Warning for EX Series Switches on page 157
■ Maintenance and Operational Safety Guidelines and Warnings for EX Series
Switches on page 164
■ Grounded Equipment Warning for EX Series Switches on page 163
■ Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 151
Fire Safety Requirements for EX Series Switches
In the event of a fire emergency involving switches and other network equipment,
the safety of people is the primary concern. You should establish procedures for
protecting people in the event of a fire emergency, provide safety training, and
properly provision fire-control equipment and fire extinguishers.
In addition, you should establish procedures to protect your equipment in the event
of a fire emergency. Juniper Networks products should be installed in an environment
suitable for electronic equipment. We recommend that fire suppression equipment
be available in the event of a fire in the vicinity of the equipment and that all local
fire, safety, and electrical codes and ordinances be observed when installing and
operating your equipment.
Fire Suppression
In the event of an electrical hazard or an electrical fire, you should first turn power
off to the equipment at the source. Then use a Type C fire extinguisher, which uses
noncorrosive fire retardants, to extinguish the fire.
148 ■ Fire Safety Requirements for EX Series Switches
Complete Hardware Guide for EX4500 Ethernet Switches
To Next Page
Loading...
Need help?
General