The intraconnect module has two captive screws on the faceplate that secure the
module in the chassis. To remove or replace the intraconnect module, follow the
instructions in “Removing an Intraconnect Module from an EX4500 Switch” on
page 123.
Related Topics Rear Panel of an EX4500 Switch on page 8■
■ Field-Replaceable Units in EX4500 Switches on page 14
■ Installing an Intraconnect Module in an EX4500 Switch on page 79
26 ■ Intraconnect Module in EX4500 Switches
Complete Hardware Guide for EX4500 Ethernet Switches
To Next Page
Loading...
Need help?
General