Juniper EX4500 Series User Manual

Table 17: SFP+ Direct Attach Cable Specifications (continued)
SpecificationModel
10 Gbps full-duplex serial transmissionRateEX-SFP-10GE-DAC-3m
SFP+ passive Twinax cable assemblyConnector type
3.3 VSupply voltage
0.57 WPower consumption (per end)
-40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in.Minimum cable bend radius
100 ohmCable characteristic impedance
2% maximumCrosstalk between pairs
1.31 nsec/ftTime delay
3 m (9.9 ft)Length
10 Gbps full-duplex serial transmissionRateEX-SFP-10GE-DAC-7m
SFP+ passive Twinax cable assemblyConnector type
3.3 VSupply voltage
0.57 WPower consumption (per end)
-40
°
C to 85
°
CStorage temperature
TwinaxCable type
24 AWGWire AWG
2 in.Minimum cable bend radius
100 ohmCable characteristic impedance
2% maximumCrosstalk between pairs
1.31 nsec/ftTime delay
7 m (23 ft)Length
Standards Supported by These Cables
The cables comply with the following standards:
38 ■ SFP+ Direct Attach Cables for EX4500 and EX8200 Switches
Complete Hardware Guide for EX4500 Ethernet Switches

Juniper EX4500 Series Specifications

General

Brand	Juniper
Model	EX4500 Series
Category	Switch
Language	English