Juniper SRX320 User Manual

Table 17: 1-Port T1/E1 Mini-PIM (SRX-MP-1T1E1-R) Network Interface
Specifications (continued)
E1 SpecificationsT1 SpecificationSpecification
HDLC features
(E1:N=1 to 31)(T1:N=1 to 24)N x 64 Kbps or N x 56 Kbps,
nonchannelized data rates
16/3216/32CRC
SupportedSupportedShared Flag
SupportedSupportedIdle flag/fill
Runts, Giants, FCS, Error, Abort
Error, Align Error
Runts, Giants, FCS, Error, Abort
Error, Align Error
Counters:
Related
Documentation
• 1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R) Overview on page 19
• 1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R) Hardware Specifications
on page 20
• 1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R) LEDs on page 21
• 1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R) Supported Loopback
Diagnostics on page 21
23Copyright © 2017, Juniper Networks, Inc.
Chapter 3: 1-Port T1/E1 Mini-Physical (SRX-MP-1T1E1-R) Interface Module

Juniper SRX320 Specifications

General

Firewall throughput	1000 Mbit/s
Number of users	50 user(s)
Quality of Service (QoS) support	Yes
Mobile VPN IPSec	250
IPS/IDS throughput	100 Mbit/s
USB 2.0 ports quantity	1
Connectivity technology	Wired
SFP module slots quantity	2
Ethernet LAN (RJ-45) ports	6
Internal memory	4000 MB
Flash memory	8000 MB
Storage media type	Flash
Power consumption (typical)	27 W
Heat dissipation	157 BTU/h
Concurrent connections	64000
Mean time between failures (MTBF)	284700 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2

Weight and Dimensions

Weight	1510 g
Dimensions (WxDxH)	299.9 x 43.9 x 191 mm