Juniper SRX320 - Table 31: Antenna Base Specifications; Table 32: LTE Mini-PIM Models

Table 31: Antenna Base Specifications
ValueSpecification
BS-05SF-174-3M-0102 (Vendor: Chang Hong)Part number
3 mCable length
SMAConnector type
29.50 mm x 73 mm x 73 mmDimensions (H x W x L)
Table 32 on page 41 provides a summary of the different models of the Mini-PIM.
Table 32: LTE Mini-PIM Models
Frequency BandOperating RegionModeModel
For LTE:
•
Bands 1 through 5, 7, 8, 12, 13, 20, 25, 26, 29, 30,
and 41
For 3G (HSPA+):
•
Bands 1 through 5, and 8
•
North America
•
European Union
•
LTE
•
HSPA+
SRX-MP-LTE-AE
For LTE:
•
Bands 1,3, 5, 7, 8, 18, 19, 21, 28, 38, 39, 40, and 41
For 3G (HSPA+):
•
Bands 1, 5, 6, 8, 9, and 19
•
Asia
•
Australia
•
LTE
•
HSPA+
SRX-MP-LTE-AA
The Mini-PIM can be configured in three modes:
•
Always-on—The Mini-PIM connects to the 3G/4G network after booting. The connection
is always maintained, as long as there are no network or connectivity problems.
•
Dial-on-demand—The Mini-PIM initiates a connection when it receives traffic.
•
Backup—The Mini-PIM connects to the 3G/4G network when the primary connection
fails.
The LTE Mini-PIM supports the following wireless standards:
•
FCC Part 2
•
FCC Part 22
•
FCC Part 24, Part 27 and Part 90
•
RSS 129 and RSS 133, RSS 130, RSS 199, and RSS 139
•
RSS 132 and RSS 133
•
EN 301 511 GSM
41Copyright © 2017, Juniper Networks, Inc.
Chapter 7: LTE Mini-Physical Interface Module