• 8-Port Gigabit Ethernet SFP XPIM Supported Transceivers on page 32
• 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications on page 34
8-Port Gigabit Ethernet SFP XPIM Hardware Specifications
Table 22 on page 31 provides the physical specifications of the 8-Port Gigabit Ethernet
small form-factor pluggable XPIM (SFP XPIM).
Table 22: 8-Port Gigabit Ethernet SFP XPIM Physical Specifications
ValueDescription
0.78 in. x 6.72 in. x 8.1 in.
(1.98 cm x 17.1 cm x 20.57 cm)
Dimensions (H x W x L)
17.6 oz (0.499 kg)Weight
SFPConnector type
XPIMForm factor
32° F through 104° F (0° C through 40° C)Environmental operating temperature
5% to 90% noncondensingRelative humidity
Up to 10,000 ft (3000 m)Altitude
Related
Documentation
8-Port Gigabit Ethernet SFP XPIM Overview on page 29•
• 8-Port Gigabit Ethernet SFP XPIM Components on page 30
• 8-Port Gigabit Ethernet SFP XPIM LEDs on page 31
• 8-Port Gigabit Ethernet SFP XPIM Supported Transceivers on page 32
• 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications on page 34
8-Port Gigabit Ethernet SFP XPIM LEDs
The 8-Port Gigabit Ethernet small form-factor pluggable XPIM (SFP XPIM) has two LEDs
for each port — LINK and ACT. Each XPIM has a STATUS LED, which indicates the status
of the XPIM. The LEDs are listed in Table 23 on page 32. See “8-Port Gigabit Ethernet
SFP XPIM Overview” on page 29 for more information.
31Copyright © 2017, Juniper Networks, Inc.
Chapter 5: 8-Port Gigabit Ethernet SFP XPIM