Juniper SRX320 User Manual

Table 46: RS-422/449 DTE Cable Pinouts for the 1-Port Serial
Mini-PIM (continued)
Description
LFH-60
Pairing
DC-37
(DB-37) PinLFH-60 Pin
Receive Ready (A)141313
Terminal Timing (A)511752
Signal Ground-1936
Receive Common-204
Send Data (B)602259
Send Timing (B)562355
Receive Data (B)1242
Request to Send (B)482547
Receive Timing (B)5266
Clear to Send (B)372738
Data Mode (B)92910
Terminal Ready (B)333034
Receiver Ready (B)133114
Terminal Timing (B)523551
Send Common-3757
--26 to 25
--18 to 17
Related
Documentation
EIA-530A DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on
page 56
•
• RS-232 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on
page 58
• V.35 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 64
• X.21 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 66
Copyright © 2017, Juniper Networks, Inc.62
SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference

Juniper SRX320 Specifications

General

Firewall throughput	1000 Mbit/s
Number of users	50 user(s)
Quality of Service (QoS) support	Yes
Mobile VPN IPSec	250
IPS/IDS throughput	100 Mbit/s
USB 2.0 ports quantity	1
Connectivity technology	Wired
SFP module slots quantity	2
Ethernet LAN (RJ-45) ports	6
Internal memory	4000 MB
Flash memory	8000 MB
Storage media type	Flash
Power consumption (typical)	27 W
Heat dissipation	157 BTU/h
Concurrent connections	64000
Mean time between failures (MTBF)	284700 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2

Weight and Dimensions

Weight	1510 g
Dimensions (WxDxH)	299.9 x 43.9 x 191 mm