Juniper SSG 20 - Page 68

SSG 20 Hardware Installation and Configuration Guide
VIII 
If you have the T1 mini PIM installed on your device and select the PPP option, the
following windows are displayed:
 “PPP Option with PPP Tab Window” on page VIII
 “PPP Option with Peer User Tab Window” on page VIII
After you have entered the necessary information, click Next.
Figure 7: PPP Option with PPP Tab Window
Table 5: Field Description for PPP Option with PPP Tab
Figure 8: PPP Option with Peer User Tab Window
Table 6: Field Description for PPP Option with Peer User Tab
Field Description
PPP Profile Name Sets the name of the PPP profile
Authentication Sets the authentication type
Local User Sets the name of the local user
Password Sets the password for the local user
Static IP checkbox Enables a static IP address
Interface IP Sets the serialx/0 interface IP address
Netmask Sets the serialx/0 netmask
Gateway Sets the serialx/0 gateway address
Field Description
Peer User Sets the name of the peer user
Password Sets the password for the peer user specified in the Peer User text field
Status Enables or disables PPP.