Rack Requirements for SSR120 | 24
Cable Specifications and Pinouts for SSR120 | 25
Console Port Connector Pinouts for SSR120 | 26
Pluggable Transceivers Supported on SSR120 | 26
Initial Installation and Configuration
Unpack and Mount an SSR120 | 28
Unpack an SSR120 | 28
Verify Parts Received with the SSR120 | 29
Register Products—Mandatory to Validate SLAs | 30
Mount an SSR120 on a Desk or Other Level Surface | 30
Mount an SSR120 on a Two-Post Rack | 31
Installing Antennas for the SSR120 Appliances that Support LTE | 33
Inserting the SIM Card | 34
Connect SSR120 to Power | 35
Connect Earth Ground to SSR120 | 35
Connect Power to SSR120 | 37
Power Off the SSR120 | 37
Connect SSR120 to External Devices | 38
Connect SSR120 to a Management Console | 39
Configuring SSR Software on the SSR120 | 40
Configure the SSR120 Appliance from the SSR Conductor | 40
QuickStart From the OTP ISO | 43
Contacting Customer Support and Returning the Chassis or Components
Contacting Customer Support and Returning the Chassis or Components | 50
How to Return a Hardware Component to Juniper Networks, Inc. | 50
Locating the Chassis Serial Number | 51
Contact Customer Support to Obtain Return Material Authorization | 51
Guidelines for Packing Hardware Components for Shipment | 52
iv
To Next Page
Loading...
Need help?
General
