Description
Page 23 © JVA Technologies www.jva-fence.com
Arming and disarming, responding to alarms or just checking the fence
voltage, the keypad makes this easy through a simple menu system or key
-
.
5.5 INTERNAL BEEPER/KEYPAD BEEPER
will sound when there is a fence alarm, a gate alarm, a door chime or a gen-
5.6 PROGRAMMABLE OPTIONS
“9.5 Programming Op-
. Each parameter has a factory set default.
5.7 ARM INPUT AND KEY SWITCH
the right-hand side of the case for this purpose.
An external switch device, for example a remote receiver or access control
keypad, can also be wired into the energizer to arm and disarm the unit.
5.8 GATE INPUT
-
“9.5.20 Input
.
5.9 LOW POWER MODE
fence live wires operate at a much lower voltage, typically 500V peak.
To Next Page
Loading...
