JVA Z13 - Group Mode (Option 26)

Page 49
© JVA Technologies.
Installation Programming Options
JVA Z13 Manual
Key3 4  
20 Host Control This Relay is completely controlled from a Host system such as Perimeter Patrol or
a Keypad. If the Host system is disconnected from the Energizer for more than 30

21 Host Control - Not
Fail Safe
This Relay Host Controlled however if the Host system is disconnected then the
Relay will maintain its current state

9.5.19 



The procedure is:
1. Connect the keypad directly each Energizer in turn
2. Program the Group Mode value for that Energizer
3. 