Appendix A: Group Simultaneous Pulse Feature
Page 71 © JVA Technologies www.jva-fence.com
14 APPENDIX A: GROUP SIMULTANEOUS
PULSE FEATURE
14.1 GROUP SIMULTANEOUS PULSE FEATURE
-
puts can be dangerous.
14.2
A group MUST have only 1 master. The other Energizers in the group are
slaves.
on the Status LED when Armed and it will not electrify the fence. This is a
-
trify the fence (pulses) when Armed. However, the simultaneous pulse fea-
NOTE:
1.
are programmed.
2.
3. If Perimeter Patrol is used any keypad in the system should not have
address 2.
For all Energizers that will be part of a group, the procedure is as follows:
1.
2.
3. On the keypad, enter [Installer’s code] *, 0, #.
4. Enter 2, 61 for master) then #.
5. Enter *, # to exit programming.
6. Connect the group using the keypad bus as the Group Mode Linking
diagram.
To Next Page
Loading...
