Page 44
Installation Programming Options
© JVA Technologies www.jva-fence.com JVA Z13 Manual
IEC standards compliance.
inhibit tamper.
master is lost.
+32: Stops the energizer sending alarm memory to a PC, relay PCB or key-
Key3 and 4
0 None
+2 Max Power
+4 2.5 Joules Limit
+8 IR Tamper enabled
+16 Stop slave on coms fail
+32 Do not send Alarm memory
+64
9.5.14
-
passed, and removed from circuit, by an intruder bridging the feed to re-
While Armed, a fence alarm will trigger if the fence voltage rises OR falls