JVC Everio GS-TD1 - Shutter Mode; Cont. Shooting Speed

SHUTTER MODE
Continuous shooting settings can be adjusted.
Setting Details
RECORD ONE
SHOT
Records one still image.
CONTINUOUS
SHOOTING
Records still images continuously while the
SNAPSHOT button is pressed.
Memo :
0
You can change the continuous shooting speed with “CONT. SHOOTING
SPEED” in the “COMMON” menu.
“CONT. SHOOTING SPEED” (A p. 114)
0
Some SD cards may not support continuous shooting.
0
The continuous shooting speed will drop if this function is used repeatedly.
Displaying the Item
1
Select still image mode.
.
2
Tap q to select the recording mode.
.
3
Tap “MENU”.
.
4
Tap “SHUTTER MODE”.
.
CONT. SHOOTING SPEED
Sets the speed for continuous shooting.
Setting Details
HIGH SPEED
0
Shoots up to 12 still images continuously in the
3D still image mode at approximately 12 images/
second.
0
Shoots up to 40 still images continuously in the
2D still image mode at approximately 12 images/
second.
LOW SPEED Shoots continuously until the recording media is
full.
Memo :
0
Shooting speed slows down gradually as continuous shooting goes on in
the “LOW SPEED” mode.
Displaying the Item
1
Select still image mode.
.
2
Tap q to select the recording mode.
.
3
Tap “MENU”.
.
4
Tap “CONT. SHOOTING SPEED”.
.
Menu Settings
114