0
When the power of this unit is turned off or the mode is switched to
recording after parallax is manually adjusted, the “PARALLAX
ADJUSTMENT” setting returns to “AUTO”.
Slideshow Playback
Still images can be played back in a slideshow.
1
Select still image mode.
.
2
Tap q to select the playback mode.
.
3
Press the 3D button to select 3D or 2D mode.
.
0
Images recorded in 3D mode and 2D mode are displayed on the index
screen separately. Press the 3D button to switch to the desired mode
for playback.
0
During 3D mode, “3D” is displayed on the LCD monitor.
0
During 2D mode, “2D” is displayed on the LCD monitor.
4
Tap on the thumbnail and tap d.
.
“Operation Buttons for Still Image Playback” (A p. 55)
Playback
57
To Next Page
Loading...
Need help?
General